Home > DEF-MODS
Sort By:
Page of 1
Standard Def-Mod (Series or parallel) Standard Def-Mod (Series or parallel)

A standard 8.4v series Mod or a 4.2v parallel mod. Simply check which you want to purchase in the options section. For our series boxes, you cannot build under .3 ohms and if you do, you do so at YOUR own risk. For a Parallel we recommend you stay above .18 ohms, If you go lower you do so at your own risk.You also get to choose 2 images you would like laser engraved onto your box. All boxes come mosfet protected and with complete 3D printed internals.

Product dimensions- 103mm x 52mm x 27mm

Please email us the images you would like on your box. All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem.

Our Price: $110.00
8.4v 18650  PWM 8.4v 18650 PWM

You are buying the BEST box mod you can get with a purchase of an 8.4v PWM DEF-MOD. In case you're unfamiliar with what "PWM" means lets change that! Pulse Width Modulation, or PWM, is a technique for getting analog results with digital means. Digital control is used to create a square wave, a signal switched between on and off. In common tongue it takes the benefits of unregulated box mods and mixes them with the benefits of regulated box mods (Variable Wattage, etc). This mod is the most versatile mod on the market; meaning you can put 1 build on it and get that single build to do minimum cloud vapor or maximum "FOG YOUR HOUSE OUT" vapor. The mod pulses the power several thousand times a second much like a Snow Wolf above 150w. This creates a wonderful vaping experience and helps minimize dry hits. We ask for a 10 day build time as we build every box to order with your requested color schemes. Attached is the color boxes we offer. Boxes require 2 x 18650 30 AMP batteries to operate (Sold Separately).

ALL boxes come with a lifetime warranty on part failures.

Please email us the images you would like on your box. . All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem.

Our Price: $160.00
26650 Series PWM 26650 Series PWM

You are buying the BEST box mod you can get with a purchase of an 8.4v PWM DEF-MOD. In case you're unfamiliar with what "PWM" means lets change that! Pulse Width Modulation, or PWM, is a technique for getting analog results with digital means. Digital control is used to create a square wave, a signal switched between on and off. In common tongue it takes the benefits of unregulated box mods and mixes them with the benefits of regulated box mods (Variable Wattage, etc). This mod is the most versatile mod on the market; meaning you can put 1 build on it and get that single build to do minimum cloud vapor or maximum "FOG YOUR HOUSE OUT" vapor. The mod pulses the power rapidly to mimic a lower power. This creates a wonderful vaping experience and helps minimize dry hits. We ask for a 2-4 week build time as we build every box to order with your requested color schemes. Attached is the color boxes we offer. Boxes require 2 x 26650 30 AMP batteries to operate (Sold Separately).

Please email us the images you would like on your box. All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem.

Our Price: $180.00
12.6v Triple Series PWM 12.6v Triple Series PWM

This is our most powerful 18650 box we offer. It uses our standard PWM chipset that we build from scratch that packs loads of power. Comes with a 30mm 510. Purchase includes 2 x HD engravings on front and back of your choice free of charge. This box requires 3 x 18650 30amp Batteries to operate(sold separate). Comes complete with custom 3d printed internals and a Internal White Voltmeter. This is a PWM with no built in reverse polarity protection. If you put the batteries in wrong it will ruin the mod. All battery positions are clearly marked on the sled to make battery insertion easier. we ask a 2-4 week build time for custom mods.

Please email us the images you would like on your box. All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

All boxes come with a lifetime warranty on part failures.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem.

Our Price: $180.00
DNA 75w Color Screen DNA 75w Color Screen

The DNA 75 is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv’s patented Wattage Control, Patent Pending Temperature Protection, Preheat, Digital User Controls, Full Color Screen, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. The USB port and Evolv’s EScribe software can be used to monitor and customize the user experience. The DNA 75 is vaping down to a science. This mod requires 2 20700 30amp batteries to operate (not included).

Product dimensions - 103mmx58mmx31mm This mod will sit a 30mm no overhang


Please email us the images you would like on your box. All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem.

Our Price: $180.00
20700/21700 Smart PWM v3 20700/21700 Smart PWM v3

We are pleased to bring you the best 20700/21700 Mod you can buy with our Smart PWM v3 20700/21700. Mod has a recessed 22mm 510 and will sit a 30mm tank or rda with zero overhang. The mod has a built in lock feature, battery life left monitor and uses tactiles to adjust voltages. As with all our mods we offer a lifetime warranty on everything we build and have honored that for the 3 years we have been making mods. Please email us with images you would want etched onto your new mod. If you want a wrapped etching make sure you check the box adding that feature. We ask a 2-4 week build time. You can use either 20700 or 21700 batteries in this mod.

Product Dimensions- 103mm x 58mm x 31mm

Please email us the images you would like on your box. All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem.

Our Price: $200.00
12.6v 3s or 14.8v 4s Lipo Smart PWM 12.6v 3s or 14.8v 4s Lipo Smart PWM

This box is using Voltroves newest smart pwm v3 board. It has loads of built in features. You can upgrade it to a 4s if desired. You will receive a manual that will explain in detail how to take full advantage of this amazing PWM. This mod is not recommended for beginners. Like on all pwms you can adjust the volts to exactly what you need using the 2 tactile switches.

Please email us the images you would like on your box. All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem. We do not cover the lipo on this mod as we have no way of knowing how it was mistreated as it does not have built in safety features like our DNAs do.

Our Price: $220.00
12.6v 3s or 14.8v 4s LIPO NLPWM 12.6v 3s or 14.8v 4s LIPO NLPWM

We have put a 2200mah LIPO battery in our popular NLPWM Box Mods. This is a 11.1v mod and is NOT for beginners! You need a 3s LIPO charger for this mod that is SOLD SEPARATELY! We would be more then happy to show you a good cheap charger you would need to get. This mod is completely digital. Meaning you adjust the power just like you would on a DNA with up and down buttons. It has a Lock feature by pressing the fire button 4 times. This will lock the mod so it cant fire. It has a low voltage cutoff at 9.9v loaded. This mod has a .21 ohms cutoff for 3s lipo and a .25 cutoff for 4s lipo . This the newest PWM Mod on the market with the NLPWM Board. As with all our mods we offer a lifetime warranty on part failures. If the box just stops working we will fix it for free. If you break it and our honest we will charge you only the cost of parts to fix it. If we test it and see you broke it and you tried saying it just stopped then we will charge you for a rebuilding it. All boxes are made to order and have a standard 2-4 week build time. Thanks for considering a DEF-MOD!

Please email us the images you would like on your box. All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem. We do not cover the lipo in this mod as we have no way of knowing how it was mistreated before its failure.

Our Price: $230.00
DNA 250 DNA 250

The DNA 250 is a powerful regulated digital switch-mode DC-DC Converter for personal vaporizers. It features Evolv's patented Wattage Control, Temperature Protection, Preheat, Digital User
Controls, OLED Screen, On board Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. The DNA 250 features cell by cell battery monitoring and integrated balance charging. The USB port and Evolv's Escribe software can be used to customize or monitor the user experience. Its the most advanced vaporizer ever made. The DNA 250 is vaping down to a science.

The lipo in this box is a 3s 2200mah or 3000mah. All boxes are made to order and have a standard 2-4 week build time.
Please email us the images you would like on your box. All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem.



Our Price: $250.00
DNA 300w DNA 300w

The DNA 300w Color is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolvs patented wattage control, patent-pending Replay Mode and Temperature Mode. This mod runs a 3s 2200mah Lipo that you charge using a 2 amp phone usb charger. DNA mods are the safest most reliable mods on the market. They pack a big hit while providing the user with peace of mind knowing the advanced DNA Board monitors and regulates the power to safe levels for them. This Mods battery is hardwired and not removable.

Please email us the images you would like on your box. All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem.

Our Price: $280.00
DNA 400w DNA 400w

The DNA 400w Color is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolvs patented wattage control, patent-pending Replay Mode and Temperature Mode. This mod runs a 4s 2200mah Lipo that you charge using a 2 amp phone usb charger. DNA mods are the safest most reliable mods on the market. They pack a big hit while providing the user with peace of mind knowing the advanced DNA Board monitors and regulates the power to safe levels for them. This Mods battery is hardwired and not removable.

Please email us the images you would like on your box. All images must be of good quality. If the images you picked out are not good quality we will notify you that you need to choose different ones. defliquids@gmail.com.

Warranty Information- If your mod just stops working one day we will repair it for free. However if you caused the damage we will not warranty if for free. If you melt the 3d printed internals from misuse of the product we will not warranty the mod. If you decide to repair the mod yourself you will void the warranty completely. If it ever has issues simply just send it back to use and we will take care of the problem.

Our Price: $325.00